Replacement Buzzer for Verity ADD60S Rear Sensor System.
(Discounts do not apply)

Replacement CPU for Verity ADD60S Rear Sensor System.
IN: Camera - 4-pin Male Connector, Power - Jack, Sensor - 4-pin Male Connector
OUT: Monitor - 4-pin Male Connector, Buzzer - 2-pin Female Connector
(Discounts do not apply)

Replacement Sensor Harness for Verity ADD60S Rear Sensor System.
27cm (10.5") Four 4-pin Aviation Male to one 4-pin Aviation Female.
(Discounts do not apply)

Replacement Housing for Verity ADD60S Rear Sensor.
Includes bracket and hardware.
(Discounts do not apply)

Replacement Power Plug / wire for Verity ADD60S Rear Sensor System.
1.5m (4.9') Power Plug with Power and Ground Wires
(Discounts do not apply)

Replacement Sensor with Aviation 4-pin Female for Verity ADD60S Rear Sensor System.
Part number for housing and hardware is 60SHSG.
(Discounts do not apply)

• LED Control Panel & IR Extender for REC02U-2020 REVEAL MDVR
• Easily see that the MDVR is working correctly.
• Point the remote included with the MDVR at the ADD02CP to send the signal to the MDVR.
• KNOW that your MDVR is working correctly and protecting your driving reputation.
• One price - discounts do not apply

Replacement or additional 128GB SD Card for Verity MDVRs
(Various SD Card manufacturers used.)

(One price - discounts do not apply)

• Use with Verity MDVRs to transfer video and information to your computer.
• Memory Card Reader for SD/SDHC/Mini SD/MMC/TF Card
• One price - discounts do not apply

• Replacement U-Bracket Monitor Mount for SM07S, SMQ7S
• Includes mounting hardware
• (Discounts do not apply)

In-Dash Flush Monitor Mount for SM07S / SMQ7S monitors.

• Fits our C001C Standard Rearview Camera as well as some competitor's cameras.
• Polished, cast aluminum
• Designed and manufactured in the USA
• (Discounts do not apply)
  

• "S" Series Monitor Mount - Universal Fan Base
• "T" Bolt slides into back of most Verity monitors
• Includes adhesive gasket base
• Easy to tighten and loosen with "Turn-Key"
• (Discounts do not apply)

• Replacement for ADD23H mount (uses the same hole pattern)
• Heavy-Duty
• "T" Bolt slides into back of most Verity monitors
  
• Easier to tighten and loosen with "Turn-Key"
• Fits Series "C", "J" (except MK10J),"S" and Legal Vision Monitor
• (Discounts do not apply)

• Standard in many Verity complete systems.
• Double knuckle design allows for 360 degree adjustments as well as high/low positions
• Easy to tighten and loosen
• "T" Bolt slides into back of most Verity monitors
• (Dimensions in photo section)

• Mount is easily adjusted and perfect for Hino Cabs
• "T" Bolt slides into back of most Verity monitors
• Attach on the dash, A-Pillar, headliner; wherever there is a flat 2.6" x 1.6" space
• Mount is 6" tall and comes with covers for chamfered screw holes.
• (Dimensions in photo section)

• Black, metal, windshield mount with slug
• OAL: 4.28", Base: .7" x 1.3". Barrel .75" Ø, Head: 1.3"Ø
• "T" Bolt slides into back of most Verity monitors
• (Discounts do not apply)

Black, metal, 2019 and new Sprinter Van windshield mount

• Two 4-pin Female to module to One 4-pin Male
• Automatically switch monitor view from truck camera to trailer camera when trailer is connected to the truck.
• No buttons to push as seen in television advertisements of pickup truck brands.
• Designed and warranted to be used exclusively with Verity camera systems.

Supports 4 cameras' audio and video, simultaneous input
Single, dual, triple, quad image for optional views
SEE FLYER for additional information

This Box Truck Camera Installation kit provides items to safely install your Verity Camera system without running to the hardware for the odds and ends you thought you had. Several national fleets purchase this kit when retro-fitting their trucks.
See the FLYER for details.

• Replacement camera bracket only for "C001C" Camera.
• (Discounts do not apply)
• NOTE: If your bracket needs to be replaced due to damage, there is a very good chance that the camera has been damaged as well. When purchasing a replacement camera, the bracket will be included.
  

• Replacement camera bracket only for "C001J" Camera.
• (Discounts do not apply)
• NOTE: If your bracket needs to be replaced due to damage, there is a very good chance that the camera has been damaged as well. When purchasing a replacement camera, the bracket will be included.

• Replacement camera bracket and sunshield only for "C001S" Camera.
• (Discounts do not apply)
• NOTE: If your bracket needs to be replaced due to damage, there is a very good chance that the camera has been damaged as well. When purchasing a replacement camera, the bracket will be included.

• Wires are separated, not broken
• No extra tool needed: strip the wire, insert the wire into the Posi-Lock, hand tighten
• (Discounts do not apply)

• Insert the hot wire, tighten, strip the leads, insert and tighten.
• (Discounts do not apply)

Replacement Monitor Splint (metal track) for attaching the monitor mounting bracket on a Verity 7" "S" monitor. Includes screws. No warranty. (Discounts do not apply)

• Removeable SM05C sunshield (included in SM05C and MK05C purchase)
• (Discounts do not apply)

• Removeable SM05J sunshield (included in MK05J and SM05J purchase)
• (Discounts do not apply)

• Removeable SM07C sunshield (included in MK07C and SM07C purchase)
• (Discounts do not apply)